En Py Ro
En Py Ro

Jackets and membrane

  1. Home
  2. Fabrics
  3. Jackets and membrane

The fabric with a membrane is deservedly considered an innovative material. It has increased protective properties, selective permeability, and due to its special structure it has water-repellent and windproof properties, and at the same time allows water vapor to pass through itself.

Also

Two-layer fabric

Specification

Article: Two-layer fabric

Composition: 100% polyester, TPU membrane

Width: 150 cm

Surface density: from 30 to 850+-5 gsm

Color: plain dyed, bleached (order for color/design from 3000 RMT)

Two-layer fabric is an outer layer of fabric, to which a membrane is specially applied, from the seamy side. This fabric is always used in products with a lining, because the lining provides adequate protection to the membrane from clogging and mechanical damage.
Send request

Three-layer Soft-Shell

Specification

Article: Three-layer Soft-Shell

Composition: 100% polyester, TPU membrane, 100% fleece

Width: 150 cm

Surface density: from 30 to 850+-5 gsm

Color: plain dyed, bleached (order for color/design from 3000 RMT)

The three-layer fabric replaces the three-layer garment pattern. This fabric, which is based on fleece, membrane and fabric is lighter and has all the performance characteristics of multilayer clothing.
Send request

Three-layer Hard-Shell

Specification

Article: Three-layer Hard-Shell

Composition: 100% polyester, TPU membrane, polymesh

Width: 150 cm

Surface density: from 30 to 850+-5 gsm

Color: plain dyed, bleached (order for color/design from 3000 RMT)

Three-layer fabric looks like a fabric with fine mesh from the inside. This is the upper fabric + membrane + knitted mesh, glued into one structure using a special lamination technology. The knitted mesh protects the membrane from mechanical damage and clogging.
Send request